July 12, 2022

The low-pressure fans of the "DN" series have been part of our product range for a long time. The radial fan fitted with forward-curved drum impellers is compact in dimensions - even though the motor is located outside the housing.

read more...

May 30, 2022

In the winding department, the later motor receives its copper in the form of selected enameled copper wires. The enameled copper wire is wound and drawn into the insulated stator slots. This is largely done in series production using special machines.

read more...

April 27, 2022

Back in 1922, Dietz-motoren was founded by master mechanic Adolf Dietz. Since that time, we are deeply rooted in Dettingen unter Teck. In a rented workshop, collectors for generators and starters were initially manufactured on a contract basis.

read more...

March 11, 2022

The electrical motors we produce are available in a wide range of versions. One of the main components is the stator. In the example of a three-phase motor, this is the "non-rotating part" - that' s why it is also called the stator.

read more...

January 19, 2022

Low-pressure radial fans from 16 m³/min flow rate

The low-pressure fans of the "DN" series are already part of our product range for a long time. The radial fan equipped with forward-curved drum impellers is compact in dimensions - although the motor is located outside the housing.

read more...

December 02, 2021

Our radial fans stand for quality and robustness. They are powerful and can be used flexibly for low, medium or high pressure. With the closely staggered sizes, the optimum unit is offered for every application.

read more...

November 12, 2021

Protection categories are defined for use in rough environments. These protection categories specify the environmental pollution in terms of contact, foreign body and moisture protection to which a system can be subjected without sustaining damage.

read more...

October 11, 2021

The radial fans of the GR and GT series have a stable, largely corrosion-resistant cast aluminum housing. The attractive housing combines practicality, robustness, high efficiency and smooth running with modern industrial design, today an important innovation factor for capital goods.

read more...

September 15, 2021

We produce a wide range of electric motors in Dettingen unter Teck. Because of the high manufacturing depth, we are able to immediately respond to customer-specific requests and implement them.

read more...

August 06, 2021

Our DN8 to DN12 radial fans - the smallest in the fan range. They are able to cope with big tasks even with low power ratings. For many years, they have been used for a wide range of ventilation tasks and impress with their robustness and durability.

read more...

July 01, 2021

Hydraulic systems are present everywhere, not only in automotive engineering, but also in mechanical engineering. The pumps used in these systems - whether constant-delivery pumps or variable-delivery pumps, open or closed systems - all require a drive.

read more...

June 01, 2021

The used but somehow confusing term " Free running fan" has nothing to do with the wildlife in a figurative sense. More clear is the term " housingless built-in fan".

read more...

May 17, 2021

The current EU-Regulation EU 2019/1781 establishing eco-design requirements for electric motors and frequency converters. In the following, the individual changes, which apply from 01.07.2021, are explained exactly.

read more...

March 03, 2021

Three-phase motors with more than one speed are often considered technology from the past. Power electronics such as frequency converters became more and more popular and replaced such complex drives.

read more...

December 14, 2020

As a manufacturer of industrial fans, Dietz-motoren responds to customer requirements and realizes customized products.

read more...

November 11, 2020

Self-ventilated or forced-ventilated motors of the IC 411 or IC 416 standard are part of everyday life and everyone knows them. The standard motor, or at least the drive of many industrial machines that looks like a standard motor, has a fan guard, a fan blade underneath it and associated cooling fins on the circumference of the stator housing.

read more...

October 23, 2020

From the outside you usually cannot see what is inside.
Often also with three-phase motors, which are operated by means of frequency converters from 50Hz or 60Hz to more than 300Hz. Fans cover, ribbed housing... From the outside, everything points to a "normal IEC motor".

read more...

September 15, 2020

High flowrate and enormous pressure increase?
The Dietz SB High Performance Blower for frequency converter operation can do both! On the one hand, high flow rates and good efficiency over a wide range of characteristic curves, on the other hand high pressure increase or decrease.

read more...

July 09, 2020

To prevent heat transfer from a machine to a drive motor, often so-called temperature locks are used. These effectively decouple the components by using the smallest possible contact surface and connection.

read more...

June 05, 2020

Electric drives in machines do not always have to provide the required power, speed and torque. Speed monitoring or a so-called standstill monitoring are attributes that are often required by the machine control, also with regard to the safety of humans and machines.

read more...

May 04, 2020

Usually metals have to be protected against corrosion by coatings. We offer various proven types of coating, including the particularly high-quality "Halar^® ECTFE coatings". The abbreviation "ECTFE coating" means "Ethylene Chlorotrifluoroethylene coating".

read more...

April 08, 2020

Centrifuges are used for the separation of substances with different masses by using the inertia of rotation. By means of mass inertia a separation of substances takes place in the centrifuge.

read more...

March 02, 2020

As an established fan manufacturer in Dettingen/Teck, our company offers products that are adapted to the requirements of customer applications. For example "sealed fans".

read more...

February 10, 2020

We have been manufacturing electric motors since 1922. These are motors for dynamic control processes, as well as designs for high speeds, with high rates of acceleration and for difficult environmental conditions.

read more...

January 10, 2020

For decades, customers have relied on the robustness of our centrifugal fans. Not only the self-produced drive motor plays a role here, but also the fan unit itself. We use aluminium housings here - but why?

read more...

December 02, 2019

High-pressure fans of the HR series solve the most diverse ventilation tasks in many areas. They are designed for high pressure differences (positive or negative pressure) and thanks to operation via frequency converters, these centrifugal fans can be flexibly optimised for a wide range of applications.

read more...

November 01, 2019

Despite what you may think, a "working point" isn't the time you have to be at work in the morning! As a fan manufacturer, we have often noticed that the term "working point" causes confusion.

read more...